1993 Toyota Supra Toyota Supra Twin Turbo Hatchback 2-Door - West Stockbridge - Cars for sale, used cars for sale, West Stockbridge - 2003067

Find
 


Classified ad details
 Back  Print

1993 Toyota Supra Toyota Supra Twin Turbo Hatchback 2-Door - Cars for sale, used cars for sale

Ref. number: 2003067 Updated: 09-06-2015 18:04

Price: 10 000 USD $

Offering: Cars for sale, used cars for sale in United States, Massachusetts, West Stockbridge

Engine Work: 2JZ-GTE (ALL ENGINE WORK DONE IN 2010) -CP .040” Oversized Pistons with .200” wrist pins attached to Carillo H-beam HD Connecting Rods with CARR bolts, floating on a rebalanced stock crank with Clevite Bearings. -Clevite Bearings for the Crankshaft as well. -New Oil Squirters for block -New Oil Pickup, New OEM oilpump, Ceramic Coated Oilpans (1 & 2) -ATI Crank Dampener -ARP Studs for the Stock Mains Caps -ARP L19 Headstuds with a stock headgasket -Port and polished Head from HeadGames with +1mm Ferrea oversized valves, sitting between Crower Springs and Retainers, under a set of HKS 264 Cams. -PWR radiator with stock shroud and HKS radiator cap, with hard medal upper hose and new rubber lower hose, with TRD cap. Antifreeze is the Toyota Red. The waterpump is also new. -There is no stock oil sandwich cooler installed, since I have a 19-row Earl Cooler instead with sandwich plate(currently off the car). Oil temperature hovers at 200-220F. -Timing Belt is a Gates belt with a Stock Cam gears, rewelded timing gear, with a SP Billet Belt Tensioner. -Timing belt and serpentine belt tensioners are both new, 4000 miles on them. The shock absorber for the serpentine belt is installed. -Stock Intake Manifold , stock throttlebody with 1000CC Rochester Injectors with Pigtails, running in conjunction with a Titan Fuel rail with 2 inlets, 1 middle return line to a Fuel Labs AFPR. The system is fed by a newly rewired Triple DENSO fuel system, with only 2 run at the same time. The system has 2 -6AN feeding to a single -10AN, and a -6AN return. -The turbo system consists of a Genuine HKS Manifold (black ceramic coated and wrapped)and HKS GT wastegate, with AN fittings throughout the air system: BOV, AFPR, Wastegate, Boost Controller(AEM 1 Controlled). The Turbo is a Comp CT367 or 67mm water-cooled with a .7 exhaust housing, with a 3” to 4” WOTM SS downpipe, midpipe and BoostLogic 4” Exhaust, with v-bands at each connection. The wastegate has a 2.5” dump tube that dumps the exhaust to atmosphere(aka LOUD). -A greddy catch can with 2 -10AN breathers welded to the valve covers with an atmospheric output line is what the system consists of. - Intercooler is a Greddy 3-row with T-bolt clamps throughout the system -Infinity 10 EMS ECU. 3.5 Bar AEM Sensor, AEM Temperature sensor, AEM Boost Solenoid, AEM Fuel Pressure Sensor, and Traction Control Enabled.-There is a Flex fuel sensor installed, and connected to the Infinity, but there is not E85 tune currently on the map. -Defi Gauges on the A-pillar with the Defilink system: 2-gauge pod but I have 3 gauges. Oil temperature, oil pressure and EGT. Egt is located at the manifold’s collector. Chassis and Steering Mods: -New power steering Pump, New Rack and Pinion (from Curt at Elmhurst), aftermarket power steering cooler on the driver’s side duct( never boiled while road racing in Texas, that’s good!) with Power Enterprise bushings for the rack(if I recall correctly), and R2 bushings for the Control Arms are newly installed as well(front). The fluid is Castrol ATF. -JIC forged inner tie rods with Megan outer tie rods with heim joints. -The suspension is a 4000 miles old, KW 3-way Variant that rides really well. Both sway bars are stock. -Wheels are new 18x9.5F and 18x11.5R Forgestar F14 in Matte black, with nitto NT05 tires all around. 275/35/18 F and 295/30/18 R. The car handles really well with the Lance Alignment and is a joy to drive. -New wheel bearings were installed 4500 miles ago, all around(might as well since everything else was new) -Brakes are 14” Stoptech 4-piston ST-35 Calipers, Front and Back, with a set of HAWK HT-10 racing pads(front) and Axis pads(rear) for the street. Fluid is Motul 600 . SS braided lines are used for the system as well as 8000 miles on a brake master cylinder. -Transmission is a rebuilt 6-speed Getrag with many new components, but not all. Gears have been changed, forks, all synchros, and bearings. It drives amazingly! Fluid is the stock V160. The clutch is a unsprung RPS Carbon Carbon with the CNC machined pressure plate and heavier chromoly flywheel. The slave and master cylinder have about 8000 miles on them as well. The shifter is new, the fork thing that supports it is new with the CNC bushings. The TRD transmission mount holds it steadily in place. The clutch, throughout bearing, release fork, c-clips, all have 4500 miles on them and the car has been drag raced at the track once with only 2 launches. Ran a best of 11.0 at 130 2 years ago. daily driving this clutch is much easier than single plate clutches. -The starter is a rebuilt Denso unit. - The rear end has a TRD Differential, with stock bushings. It is better than the stock Torsen Unit. Interior: -Black Interior with 2 Sparco Torino 2 seats in Blue. The rear seats are the sto

Advertising
Classified ad images
Contact information
First name: Burr
 
Last name: Sears
 
Ask about this ad
Email *
 
Retype E-mail Address *
 
Main personal information
First name:  
Last name:  
Phone number:  
Mobile number:  
Please enter your message below to send it to ad owner.
Your message: *



Our button:
FREEADSinUS.com

Button code